• D1-AM1-Plenary: Irene Van Kamp
    • Update of the WHO evidence reviews and their implications for policy and research
  • D1-AM2-Keynote: Nick Wimbush
    • Noise in planning and environmental impact assessment in Australia
  • D1-AM2-S1: Policy, regulations & standards
    • AS 1055: 2018 revision
    • The relevance of the 2018 WHO noise guidelines to Australasian road traffic noise objectives.
    • Road traffic noise impacts and property turnover
    • Noise from amplified entertainment venues
    • Expected ambient noise levels in different land-use areas
  • D1-AM2-S2: Underwater acoustics 1
    • Sediment characterization from acoustic echo sounding using an artificial neural network
    • Interchangeability of two existing formulations of sound propagation in isothermal surface ducts
    • Acoustic propagation in realistic 3D nonlinear internal waves
    • Estimates of coherent leakage of sound from ocean surface ducts for first and higher order modes
    • Long-range average reverberation intensity attenuation characteristics in shallow water
  • D1-PM1-Keynote: Stephen Moore
    • Acoustic signature control on maritime platforms
  • D1-PM1-S1: Environmental noise
    • Noise impact and its magnitude
    • Noise in a big city - is Jerusalem different?
    • Remotely Piloted Aircraft Systems (RPAS) noise in an urban environment
    • Indiscernible noise - a review of acoustic criteria for impulsive noise event in presence of background noise
    • The use of probabilistic noise modelling in the design of open cut mines
  • D1-PM1-S2: Underwater acoustics 2
    • Investigation of temporal coherence and related issues during the Littoral Continuous Active Sonar 2016 trial
    • Acoustic velocity signatures of airguns - preliminary results
    • An improved correlation of bubble size distribution with the measured acoustic spectrum for a turbulent bubble plume
    • Exploring the classification of acoustic transients with machine learning
  • D1-PM2-S1: Transportation noise 1 - Road traffic noise
    • Investigation of uniform and non-uniform traffic distribution on road traffic noise prediction for multi-lane roadways
    • Comparison of equivalent continuous noise levels and day-evening-night composite noise indicators for assessment of road traffic noise
    • Long term acoustic performance of different asphalt configurations
    • RONDA CPX trailer measurements in Queensland
  • D1-PM2-S2: Underwater acoustics 3
    • Signature whistles of Indo-Pacific bottlenose dolphins (Tursiops aduncus) in the Fremantle inner harbour, Western Australia
    • A passive acoustic survey for marine mammals conducted during the 2019 Antarctic voyage on Euphausiids and Nutrient Recycling in Cetacean Hotspots (ENRICH)
    • Surface generated underwater noise in open and enclosed waters
    • Icebergs and storms in the Southern Ocean as sources of low frequency noise along Australian southern coasts
  • D2-AM1-Plenary: Jian Kang
    • Urban sound planning - a soundscape approach
  • D2-AM2-Keynote: John Davy
    • Structural connections and the sound insulation of cavity walls and double glazing
  • D2-AM2-S1: Transportation noise 2 - Aircraft noise
    • Citywide noise mapping for ANEF Contours
    • Assessing the environmental impacts of aircraft noise
    • Competing considerations for aircraft noise monitor placements
    • Experimental investigation of contra-rotating multi-rotor UAV propeller noise
    • Benchmarking a quasi-steady method for predicting propeller unsteady loads
  • D2-AM2-S2: Building acoustics & vibration
    • The effects of mass-air-mass resonance on the Rw + Ctr performance of wall systems
    • Mass-air-mass resonance cavity suppression using Helmholtz Resonators
    • Acoustics behaviour of CLT structure: transmission loss, impact noise insulation and flanking transmission evaluations
    • Effectiveness of the rubber ball compared to the tapping machine as the impact source to measure the impact sound insulation properties
    • A practical approach to building isolation
  • D2-AM2-S3: Underwater acoustics 4
    • Investigation of underwater hull radiation due to machine noise
    • Low-frequency underwater acoustics sensitivity calibration in a chamber
    • The sounds of electric ferries
  • D2-PM1-Keynote: Kym Burgermeister
    • Acoustic design for the Melbourne Metro tunnel project
  • D2-PM1-S1: Transportation noise 3 - Rail noise & vibration
    • The effect of track decay rate on in-carriage noise for resilient track fixings
    • Ground-borne noise & vibration propagation measurements and prediction validations from a railway tunnel project
    • Curving noise from the Western Australian freight rail network: wayside monitoring and mechanism analysis
    • Comparison of rail noise modelling with CadnaA and SoundPLAN
  • D2-PM1-S2: Room acoustics 1 - Design & methods
    • Ray-tracing computer-aided-design tools in auditoria design - past and future
    • Improving shape design of auditoriums with real-time feedback based on parametric modeling, simulation and machine learning
    • Lateral reflections in the Sydney Town Hall; preservation of room acoustics in a historically significant venue
    • Using acoustic cameras with 3D modelling to visualise room reflections
  • D2-PM1-S3: Signal processing
    • 2D tomographic imaging of active sonar echoes using a non-uniform FFT technique
    • Use of robust Capon beamformer for extracting audio signals
    • Cepstral coefficient feature extraction for active sonar classification
    • Use of a deep convolutional neural network and beamforming for localisation and diagnosis of industry noise sources
  • D2-PM2-S1: Wind turbine noise
    • Comparison between perceptual responses to traffic noise and wind farm noise in a non-focused listening test
    • Wind farm infrasound detectability and its effects on the perception of wind farm noise amplitude modulation
  • D2-PM2-S2: Room acoustics 2 - materials
    • 20 years of micro-perforated (transparent) sound absorbers
    • Walk-through auralization framework for virtual reality environments powered by game engine architectures, Part II
  • D3-AM1-S1: Cognition & indoor environment
    • Co-teaching in (refurbished) flexible learning spaces: Promoting quality acoustics for learning and collaboration.
    • Learned helplessness: effect on future performance from noise and negative past performance.
    • Improving speech privacy and acoustic comfort in offices
    • Restaurant acoustic comfort assessment methods
  • D3-AM1-S2: Noise control 1
    • Analytical models of acoustic scattering by an infinite air-filled steel cylindrical shell in water under plane-wave excitation
    • The effect of hemispherical surface on noise suppression of a supersonic jet
    • Modelling the vibro-acoustic behaviour of expansion chamber silencers for fluid-filled pipe systems
    • Transmission, reflection and energy exchanges for waves in finite one-dimensional PT-symmetric periodic structures
  • D3-AM2-S1: Aeroacoustics
    • The influence of flexible tabs on high speed jet noise
    • Embedded large eddy simulation method for predicting flow-induced noise
    • Prediction of small-scale rotor noise using a low-fidelity-model-based framework
  • D3-AM2-S2: Noise control 2
    • Static insertion loss, transmission loss and noise reduction testing of an acoustic louvre
    • Lightweight noise barriers: The real-world effects of panel surface mass and absorption on acoustic performance
    • Case studies of innovative window and balcony design for traffic noise mitigation