• Keynote lectures
• Optimisation of Active and Semi-Active Noise and Vibration Control Systems
• But are the Trains getting any Quieter?
• The Challenges of Noise Control in Hospitals
• Acoustic Holography based on the Inverse-BEM for the Source Identification of Machinery Noise
• Recent Developments in Applications of Microperforated Panel Absorbers
• Predicting and Reducing Aircraft Noise
• Two Observations on the Wave Approach to SEA
• R-Acoustic and vibration theory
• An Asymptotic Approach for the Coupled Dispersion Characteristics of a Fluid-Filled Cylindrical Shell
• Stochastic Finite Element Analysis of the Free Vibration of Functionally Graded Material Plates
• Acoustically Controlled Rotations of a Disk in Free Field
• Dependence of Oscillational Instabilities on the Amplitude of the Acoustic Wave in Single-Axis Levitators
• Non-Uniform, Harmonic, Edge Excitation of a Waveguide
• Zero-Pole Analysis of a Tensioned String with Periodic Stiffeners
• Modal Probabilistic Analysis: Theory and Application
• The Use of the Propagation Equation for the Case of Plane Longitudinal Waves Through Bars with Variable Section, to Study the Impedance Transformers Utilized for Ultrasonic Welding
• Vibration Analysis of a Cracked Beam Subjected to a Traveling Vehicle
• Estimation of the Active and Reactive Sound Power Using Hyper-Matrices of Impedance
• Vibration Control Method of Speaker Enclosure and its Effect on Replay Sound Quality and Summing Localization
• Design Sensitivity Analysis of Zwicker’s Loudness Using the Adjoint Variable Method
• Parametric Vibrations of the Rotor
• Gyroscopic Effects in Vibrating Fluid-Filled Spheres Subjected to Inertial Rotation
• Investigation of Gyroscopic Effects in Vibrating Fluid-Filled Cylinders Subjected to Axial Rotation
• On Gyroscopic Effects in Vibrating and Axially Rotating Solid and Annular Discs
• Statistical Energy Analysis Using Transmission Coefficients Derived for Finite Coupled Plates
• On the Prediction of the Vibroacoustic Response of Complex Structures with added Noise Control Treatments under Mechanical Loads
• A Comparison of Structural-Acoustic Coupled Reduced Order Models (ROMS): Modal Coupling and Implicit Moment Matching Via Arnoldi
• Wave Propagation, Reflection and Transmission in Curved Beams
• Free Vibration Analysis of Sandwich Hemispherical Shells with Constrained Electro-Rheological Fluid Damping
• Analysis of 1/2-Order Subharmonic Resonance in a Horizontally Supported Jeffcott Rotor
• The Result Analysis of the Sound Intensity Level Generated by a High Power Transformer
• Some of the New Approaches to the Theory of Designing Acoustic Thickeners
• Dynamic Response of a Structure with Uncertainty in its Parameters and Applied Forces Using the Interval Factor Method
• Dynamic Analysis of Vehicles with Uncertain Parameters
• Dynamic Structure Modification Using Dents
• Some New General Results on the Fluid-Structure Interaction Problem
• R-Acoustical ecology
• Acoustic Detection of Tension Wood in Eucalypts
• Sound Source Localization with Bio-Mimicking Parasitoid Fly
• The Safeguarding of Marine Mammals Development of Detection Methods in a Blast Environment
• R-Active noise and vibration control
• Feedback Control of Piezo-Laminate Composite Plate
• Systematization of the Principles of Classification of Active Noise and Vibration Control Methods
• Active Control of Free Beam Vibrations Utilizing Actuator Optimization
• An Actuator Fault Detection Concept for Active Vibration Control of a Heavy Metro Vehicle
• Moment Control of the Sound Radiated from an Axially Excited Cylindrical Shell
• Vibroacoustic Control of Honeycomb Sandwich Panels Using MFC Actuators
• The Effect of Boundary Conditions on Active Control of Sound Radiation from a Rectangular Plate
• A Geometric Approach to the Optimal Design of Remotely Located Broadband Vibration Control Systems
• Active Vibration Clamping Absorber Design
• Control of Vehicle Suspension Using Nonlinear Energy Sink Controller
• Design of Command Shaper Using gain-Delay Units and Particle Swarm Optimisation for Vibration Control of a Flexible System
• Active Control of Interior Noise in a Rectangular Cavity with Two Flexible Panels
• Optimal Control of a Pretwisted Tapered Rotating Beam with Tip Rotor
• Optimum Quasi-Adaptive Resonance Changer for Submerged Vessel Signature Reduction
• Adaptive Control of an Mr Mount for Vibration Attenuation
• Multi-Channel Adaptive Vibration Control of Smart Plate Using Hybrid Algorithm
• Evaluation Methodology of the Technical Condition of a Power Transformer Based on the Measurement Results of Mechanical Vibrations of its Tub
• Wavelet Analysis of the Power Transformer Tub Vibrations
• Optimization in Active Non-Stationary Random Vibration Control for Smart Truss Structures with Uncertainty
• Nonlinear Control of a One Axis Magnetic Spring
• Multidelay Adaptive Filters for Active Noise Control
• R-Audiology
• Aural Characteristic of the Bone Conduction Speaker on the Cheek Bone
• Binaural Directivity Pattern Measurements and Simulation of the KEMAR Head Model
• Digital Hearing Aid DSP Chip Parameter Fitting Optimization
• R-Bioacoustics
• Assessment of the Smoothness of Surfaces with an Acoustical Probe
• Promotion of Extraction of Green Tea Catechins in Water Extraction at Low Temperature Using Ultrasound
• Use of Scattering of Ultrasound Pulses and Shock Waves by Kidney Stones for Imaging in Lithotripsy
• How Termites Use Vibration to Assess Potential Food Structures
• R-Community noise
• Monitoring and Assessment of Aircraft Noise in an Airport’s Neighborhood
• Correlation of Rural Highway Road Traffic Noise with Vehicle Speed and Commercial Vehicle Percentages for the Day and Night Time Periods
• Protection against Noise on A6 Highway Rijeka-Zagreb, Karlovac-Novigrad Section
• R-Computational acoustics
• Investigation of Quantum and Classical Models for Molecular Relaxation Using the Direct Simulation Monte Carlo Method
• Split Region Acoustical Wave Propagator and its Applications
• An Analysis of the Changes to the Mechanical and Acoustical Properties of Paper Caused by the Damage Mechanisms Present in the Fibre Structure
• Strong Coupling of the Fast Multilevel Multipole Boundary Element Method with the Finite Element Method for Vibroacoustic Problems
• The Head Related Transfer Function Simulation by FEM/IEM and Reciprocal Theorem
• Study on Acoustic Scattering by Hard Plane and Soft Surface Multi-Cracked Plate
• Partition Hole Design for Maximizing or Minimizing the Fundamental Eigenfrequency of a Double Cavity by Topology Optimization
• Comparison of Higher-Order Numerical Schemes and Several Filtering Methods Applied to Navier-Stokes Equations with Applications to Computational Acoustics
• An Acoustic Finite Element Including Viscothermal Effects
• Boundary Element Models of Horn Loaded Loudspeakers
• Derivative Free Optimisation in Engineering Acoustics
• A Numerical Study of Sound-Structure Interaction in a Duct Structure by the Acoustical Wave Propagator Method
• Graft of the Boundary Integral Method Onto the Image-Source Method for Vehicle Acoustics
• Benchmark Tests to Rank Software for Noise Prediction
• R-Condition monitoring
• Energy Consumption and Machinery Vibrations
• Gearbox Fault Detection by Motor Current Signature Analysis
• Spectral Analysis of Tapered Roller Bearing Vibration Using Inductive Modeling
• Vibration Event Detection: A Monitoring Method for Slow Speed Bearings
• Symmetric Wave Decomposition as a Means of Identifying the Number of Damaged Elements in a Slow Speed Bearing
• De-Convolution of Time-Series Data Using Translational Symmetry and Eigenstate Analysis
• Symmetry Methods Applied to the Condition-Monitoring of Slow Speed Slew Bearings
• Intellegent Two Wire Vibration Switch - New Class of Monitoring Device
• Chain Fault Detection of Escalator Using Handrail Vibration
• Spectrum Enhancement of Laser Vibrometer Signals Using a New Speckle Noise Reduction Technique and Angular Resampling
• Diesel Engine Fault Diagnosis Based on Vibration Monitoring and Artifical Neural Network
• Milling Cutting Tools Diagnosis with Higher Order Cyclic Spectra
• Detection of Incipient Bearing Faults in Gas Turbine Engines
• Contrast Function Based Fourth-Order Statistics and Wiener Filtering for Separation of Convolutive Mixtures
• Condition Monitoring and Vibration Testing of Centrifugal Pumps
• Machinery Vibration Analysis and Condition Monitoring: A Collaborative Approach
• Vibrodiagnostic Method for Determination of the State of Wear of HCR Gear Sets
• Wear Oriented Strategy for Gearbox Remaining Lifetime Estimation
• Smart Condition Monitoring by Integration of Vibration, Oil and Wear Particle Analysis
• Time-Frequency Analysis of Acoustic Signals for Condition Monitoring of Fluid-Filled Pipelines
• Rolling Element Bearing Fault Diagnosis Based on Genetic Algorithms
• Rotor Crack Detection from Vibration Monitoring using a NARMAX Modelling Approach
• The Investigation of Submerged Vertical Pumps in a Power Plant Using Vibration Based Condition Monitoring Technique
• R-Duct acoustics
• A Modified Green’s Function for a Duct and its Application to the Calculation of the Sound Field Generated by a Piston
• Determination of Acoustic Properties for Open Duct Termination in Hot Jet Conditions Using FEM Simulation
• An Assessment of Alternative Sensor Technology for Transfer Matrix Measurements in Combustors
• Generating a “Silent” Flow of Air to Measure the Aerodynamic and Acoustical Performance of a Louvre Under Acoustical Laboratory Conditions
• Abnormal Resonance Noise of Exhaust Gas Passage in Urban Combined Power Plant
• R-Environmental and occupational noise
• Recent Approaches to Environmental Noise Monitoring and Estimation of its Influence to the Health of Inhabitants
• Health and Safety Effects of Vibrations in Helicopters
• Regulating the Rapidly Developing Oil Sands Industry in Alberta and its Implications on Environmental Noise Monitoring and Assessment
• Optimising the Application of European Directive 2003/10/CE Performing Simple WED₀₀₇ Dosimetry
• Noise Control Projects: the European Experience
• The Case for Spectral Baseline Noise Monitoring for Environmental Noise Assessment
• Experimental Outdoor Sound Propagation and ENM
• Noise in Hospital Areas - Measure and Evaluation
• Acoustic Performance of First Generation Apartment Houses in Korea
• R-Human response to sound and vibration
• Observation of Pure Frequencies in Bioresonance Vocal Sounds
• Effects of Temporarily Limited Noise Calming Periods During Sleep
• Cochlear Mechanics, the Acoustic Reflex and Noise Induced Hearing Loss
• Acute Effect of a Helicopter Flight on Cellular Tissue Biochemical Markers
• Correlation between SIL and SII in a Light Aircraft Cabin During Flight
• Ride Comfort Evaluation for the Korean Experimental High-Speed Train
• The Effects of Low-Frequency Vibrations on Control Profile of Blood
• R-Industrial and occupational noise
• Dollars and dB. the Cost of Conservative Acoustics in Industrial Noise Control
• Noise in the Intensive Care Unit (ICU)
• Development of a Silencer for Acoustic Enclosures
• Noise Control in Hydroelectric Stations
• The Mechanism of Noise Formation and Calculation of Noise Characteristics of Underexpanded Steam Jets
• R-Low frequency noise and vibration
• Simulation of Engine Vibration on Nonlinear Hydraulic Engine Mounts Through Full-Vehicle Model
• Response Analysis of Ship Structures Subjected to a Cluster of Impulsive Excitations
• Exposure of Timber Truck Drivers to Whole-Body Vibration and Noise
• Impact Property and Post Impact Vibration between Two Identical Spheres
• Theoretical and Numerical Study on Hydroelastic Vibration of Plate for Various Bounded Fluid Field
• Stationary Response of a Military Tracked Vehicle
• A Spectral Finite Element Model for Thin Plate Vibration
• Stochastic and Chaotic Analysis of Subharmonic Response of a Shallow Cable
• Comfort Analysis of Lightweight Floor System
• R-Machinery noise control
• Minimisation of Noise and Vibration Level from a Steel Panel
• Modeling of the Sound Transmission Loss of Leaks and Openings
• Noise Reduction of Personal Color Laser Printer
• Investigate the Noise Problems of Ball Screws With and Without Cage
• Noise Control on Backhoe Loaders by Coherence and Intensity Techniques
• Acoustical Treatment of Emergency Power Generator
• Optimization of Sound Insulation in the New Generation of Washing Machines
• Powered Seat Adjuster Noise Characteristics and its Psychoacoustics Assessment
• R-Machinery vibration control
• How to Predict the Vibration Effect Due to Machine Operation on its Surroundings
• Closed-Loop Feedback Model of Chatter in a Shaping Operation
• Analysis of High Longitudinal Vibration on a Diesel Generator Using Modern Analysis Tools
• River Pump Room Isolation from State Library
• Updating an Elastodynamic Model of Gear Pumps to Helical Gear Prototypes
• Influence of Design and Operational Parameters on the Dynamic Behaviour of Gear Pumps
• Which Are the Most Important Pressure Effects in Dynamic Analysis of Gear Pumps?
• Analysis of Vibratory Response and Noise Radiation of Engine Block Coupled with the Rotating Crankshaft and Gear Train System
• Investigating the Effects of the Static Cutting Force on the Chatter Vibrations of Milling Process
• Numerical/Experimental Characterization of a Piezoelectric Driven Electromedical Device
• Structure-Borne Noise Generated by Vacuum Cleaner Suction Units
• An Accurate Method of Knock Detection Using Wavelet Transform for Spark-Ignition (SI) Engine
• Active Control of Chatter Vibrations in a Turning Process Using an Adaptive FXLMS Algorithm
• Dynamics of Piezoceramics-Based Mass and Force Actuators for Rotating Machines
• The Design of Motor Brackets for the Reduction of Structure-Borne Noise in Package Air-Conditioners
• A Study of the Design of a Cantilever Type Multi-D.O.F. Dynamic Vibration Absorber for Micro Machine Tools
• Identification of Machine Tool Chatter for Milling Operations with Runout
• Investigation of Torsional Vibration Characteristics of Marine Diesel Engine Crankshaft System
• Shock Analysis of Propulsion Shaft of the Ship with Consideration of the Oil Film Force
• Research on Dual-Shaker Sine Vibration Control
• Reduction of Noise and Vibration of Front Loading Washing Machine in Spin-Cycle
• R-Measurement techniques
• Vibro-Acoustic Characterisation of a D.I. Diesel Engine by the Use of the Scanning Laser Vibrometer Technique
• Nonlinear Effects in Airborne Sound Insulation Measurement
• Experimental Comparison of PU Probes and Microphone Arrays Used in Impulse Acoustic Holography
• Analysis and Performance Monitoring of Electro Acoustic Systems
• A Method for Optimal Reconstruction of Velocity Response Using Experimental Displacement and Acceleration Signals
• Analysis, Design and Fabrication of MEMS Capacitive Microphones
• An On-Line Monitoring Technique for a Pipe Thinning
• Effect of Artificial Mouth Size on Speech Transmission Index
• Comparison of Speech Measurements in a Diffuse Space
• Investigation of Start-up Impact Characteristics of Liquid Rocket Engines
• A Numerical Study on Practical Measurement Method of Vibration Intensity in a Plate with Standing Wave
• Extraction of Wavenumbers and Amplitudes from Plate Vibration Measurements
• Measuring Wave Fronts of Inflating Airbags
• Measured Performance of a Directional Noise Monitoring System
• Laser Doppler Vibrometer for Measuring Small Amplitude of Vibration Using Synthetic Heterodyne Interferometry
• Modeling the Interaction of Guided Wave with the Welded Support in Pipes
• Using Hysteresis Loop and Torsional Shock Loading to Asses Damping and Efficiency of Cyclodrives
• Finite Periodic Structure of Beam for Low Frequency Structure-Borne Sound Attenuation
• Online Non-Contact Torsion Sensing Method Using Fiber Bragg Grating Sensors and Optical Coupling Method
• R-Modal analysis
• Effect of Axial Force, Unbalance and Coupling Misalignment on Vibration of a Rotor Gas Turbine
• Vibration Analysis of Vibratory Gyros
• Frequency Response of Flat Post-Tensioned Concrete Floors: Frequency Coefficient-Root Function Method
• Operational Modal Analysis by Using Transmissibility Measurements with Changing Distributed Loads
• Influence of Stiffness and Mass Changes on Eigen Frequencies of Beam with Piezo Electric Patch
• Modal Identification of the Wet Modes of a Marine Structure
• New Strategies for Model Validation Using Modal Test Data
• An Investigation into the Linearity of the Sydney Olympic Stadium
• Development of an in-Service Dynamic Model of a Double Deck Passenger Train
• Structural Stress Analysis Undergoing Harmonic Excitation Using Modal Theory
• Optimum Design of Vibration Absorber with Variable Position for an Euler-Bernoulli Beam Under Moving Point Excitation
• Operational Structural Transfer Path Analysis
• Experimental Evaluation of the Modal Damping of Automotive Components with Different Boundary Conditions
• Investigation of the Dynamic Properties of a Boring Bar Concerning Different Boundary Conditions
• Energetic Characteristics of Vibration Loads on a Mechanical Object
• Modal Analysis of Asynchronous Motor Vibration
• Modal Analysis of Large Structures Submerged in a Fluid
• Study on the Dynamic Tilt Characteristics of Optical Pickup Actuators Considering Electromagnetic Nonlinearities Using Coupled-Field Analysis
• Shimmy Evaluation Using Theoretical Multibody Model and Experimental Techniques
• System Reduction in Nonlinear Multibody Dynamics of Wind Turbines
• A Method of Measuring the Axial Elastic Modulus of a Sandwich Cylinder Based on Modal Testing
• Comparison of FE and Modal Models in Model Updating Methods
• The Mass-Loading Effect of Accelerometers on MAC Criterion
• Transient Vibration Analysis for Generating Low Electrical Power
• Operational Modal Analysis in Presence of Unknown Varying Harmonic Forces
• Dynamic Response of Box-Type Sonar Structure
• Influence of a Rectangular Plate Inhomogeinity on Natural Frequencies of a Clamped Rectangular Plate
• Vibration Analysis of Mindlin’s Sandwich Plate (FSDT) Under Random Excitation
• Detection of Damage Location in Structures Using Operating Deflection Shape
• Eigenfrequency Computation by the Finite Sine Transform Method on a Rectangular Plate Carrying Arbitrary Number of Concentrated Masses and Springs
• Propagation Phase Representation in 3D Space Using Poles and Zeros in Complex Frequency Plane
• R-Noise control elements
• Dynamic Response Analysis of Rectangular Perforated Plates with Varying Sizes of Circular Perforation Holes
• Effectiveness of Noise Barriers Tilted Towards the Traffic Way Over Bridges
• Acoustic Barrier for Transformer Noise
• Study the Panel and Helmholtz Resonances of a Micro-Perforated Absorber
• R-Noise source identification
• Localization and Identification of Persons and Ambient Noise Sources Via Acoustic Scene Analysis
• Noise Source Identification in Magnetic Field Using SVDD (Support Vector Data Description)
• Sound Propagation Through a Heat-Exchanger Tubes Array in Power Boiles
• Ranking of Partial Noise Sources and Noise Control Measures
• Neural Techniques for Source Identification
• R-Outdoor sound propagation
• Noise Evaluation in a Race-Track: Measurements, Software Analyses and Need of Continuous Monitoring. Comparison Among the Results.
• Traffic Noise Abatement by Means of Acoustical Barriers: An Example of Reliability of Prediction Models with Different Kind of Barriers and Different Context
• R-Signal processing
• A Cepstrum-Based Method for Remote Train Detection
• Binaural Cepstrum Coefficient and its Application to Ground Target Recognition
• Limitations and Error Analysis of Spherical Microphone Arrays
• Application of Cepstrum Analysis in Speech Coding
• R-Sound sources
• Linear Sources with Non-Linear Distribution of Sound Energy
• Direct Algebraic Method for Sound Source Localization with Finest Resolution Both in Time and Frequency
• R-Transportation noise
• Urban Transport and Noise Impact: A Preventive Applied Research to Control Noise Impact of New Road to be Build in Catania Province
• Frequency Dependence in Tyre-Road Emissions Using the Close Proximity Method
• Repeatability of CPX Tyre/Road Noise Measurements
• Modified Tire-Pavement Noise Measurement Techniques for Noise Assessment on Asphalt-Rubber Roads
• Noise Source Identification of Korean High Speed Train
• Regulation of Heavy Vehicle Engine Brake Noise in Australia
• Novelty Detection of Radar Signal Using Support Vector Data Description
• The Contribution of the Individual Sound Source Generated from Shinkansen Vehicles
• A Model of the Wear Due to the Rolling Contact of a Wheel Over a General Rail Profile
• A Case Study on the Effect of Speed Variation on the Growth of Wear-Type Rail Corrugation
• Comparing Weekly and Weekday Averaged Traffic Data When Modelling Traffic Noise
• A Recent Investigation into the Influences of Some Australian Asphalt Pavement Surfaces on Road Traffic Noise
• Characteristics of Aerodynamic Noise from the Inter-Coach Spacing of a High-Speed Train
• Noise Characteristics of an Exposed Aggregate Cement Concrete Surface
• The Study of Vertical Distribution of Urban Road Traffic Noise
• R-Ultrasound
• Ultrasound Piezoceramic Transducer for Underwater Acoustics in Sonochemistry
• Behaviour of Ultrasonic Wave Velocities in Materials Under Elastic Thermo Mechanical Effect
• Removal of Dust on Flat Board by Device of Focusing Ultrasonic Waves
• Therapeutic High Intensity Focused Ultrasound Fields (HIFU): Acoustic Characterization And Nonlinear Mechanics Of Heating
• R-Vibration analysis
• Impact Mass Estimation for a Plate Type Structure by Using Smoothed Wigner-Ville Distribution
• Using Vibrational Properties of the Wheel to Identify Tyre - Road Friction
• Vibration Fatigue Design Methodology of a Large Scale Heavy Duty Robot
• Vibration Analysis of a Beam Carrying a Moving Mass
• Special Issues Related to Detection of Circumferential Crack at Different Orientations in Pipes by Vibration Method
• Response and Prediction of Dynamic Characteristics of Worn Rail Pads Under Static Preloads
• Artificial Shock Loading Quantities: Experimental Studies into the Influences of Railway Track Environments
• Experimental Identification of Fractional-Derivative Parameters of a Damping Material Using the Optimization Technique
• System Identification in Stochastic Domain Using System Output Only
• The Application Study of Force Limited Method in Vibration Tests
• S-Acoustic materials and their characterization
• Accurate Measurement of Small Absorption Coefficients
• Influences of Compression Effect on Sound Absorption Characteristics
• Acoustical Properties of Polyurethane Open Cells Materials: Experimental Investigation and Theoretical Models
• Acoustic Tests on Original Concrete and Inert Mixture Materials
• Standardization of Road Traffic Noise Map in Korea
• Development of a Semi-Empirical Model of Mechanical Hysteresis for Sandwich Composite Materials, and System Identification Using Heuristic Optimization Methods
• Estimation of Sound Absorption Coefficients of Porous Materials
• Frequency Dependent Tortuosity Measurement by Means of Ultrasonic Tests
• Performance of Perforated Facing Absorbers
• Stability of Sound Speed and Attenuation Identified in Material Samples
• S-Active control of sound
• Robust Stability in Feedback Active Noise Control
• Active Noise Control with a Virtual Acoustic Sensor in a Pure-Tone Diffuse Sound Field
• Active Noise Control on High Frequency Narrow Band Dental Drill Noise: Preliminary Results
• Nonlinear Secondary Path Model Identification
• Active Control of Vibration and Radiated Sound of a Submerged Circular Plate
• A Brief Review of Active Control of Environmental Noise and its Applications
• Suboptimal Multichannel Adaptive ANC System
• Feedback Supervising Feedforward Minimum-Variance Control of Acoustic Noise
• Robust Feedback Disturbance Rejection for Sound-Structure Interaction Systems Using Optimal Sensor - Actuator Location
• Robust Control Design for Active Noise Control Systems of Ducts with a Ventilation System Using a Pair of Loudspeakers
• S-Active noise and vibration control in practical system implementations
• Noise Suppression Using Active Noise Control and Masking
• The Improved Active Control Algorithm for Marine Diesel Two-Stage Vibration Isolation System
• Robust Pole Placement for Active Vibration Control of Seismic-Excited Buildings
• Active Control for Vibroprotection of Operators of Technological Machines
• Simultaneous Optimization of Structure Control of Smart Tensegrity Structures
• A Feedforward Active Noise Control System for Ducts Using a Passive Silencer to Reduce Acoustic Feedback
• Active Vibration Control of Hard-Disk Drives Using PZT Actuated Suspension Systems
• Position Dependent Linearized Elastic Models of Parallel Robot Systems with Embedded Smart Devices for Vibration Suppression Control Algorithms
• Experimental Modal Analysis of an Actively Controlled Scaled Metro Vehicle Car Body
• Simulation of a Combined Switched and Inductive Shunt Control Acting on a 2D Structure
• Dynamic Modelling and Input Shaping Control for Positioning Stage
• Initial Experiments with a Finite Element Model of an Active Boring Bar
• S-Advanced signal processing
• State Estimation Method for Sound Environment System with Unknown Structure and its Application to Evaluation of Road Traffic Noise
• High Quality Recording Through Microphone Array in Noisy and Reverberant Environment
• In-Car Speech Enhancement Using Ensemble Empirical Mode Decomposition
• Determination of Mechanical Properties of a Nonuniform Beam Using the Measurement of the Excited Longitudinal Elastic Vibrations
• A Proposal to Hi-Tech Pollution Based on the Criterion of “Relationism-First” - A Principle Experiment for the Relation between Acoustic and EM Fields Around VDT
• Shock Spectrum Calculation of Structural Response to UNDEX
• S-Aeroacoustic measurements - source location
• Beamforming in Highly Reverberant Wind Tunnels Possibilities and Limitations
• A Review of Selected Experimental Investigations of Curle’s Theory
• Diagnostics of Aero-Acoustic Performance of Forward Slanted Perforated Tube
• Noise Reduction of Handheld Vacuum Cleaners According to Geometric Optimization of Air Passages
• Experimental Study of the Aircraft Engine Duct Combined Liners
• S-Aeroacoustics
• A Numerical Study of Fluid Flow Past a Circular Cylinder at Re = 3900 and a Practical Approach to Noise Prediction
• Internal Accoustic Excitation to Enhance the Airfoil Performance at High Reynolds Number
• Development and Validation of a Small-Scale Anechoic Wind Tunnel
• S-Architectural acoustics
• A Simple Formula for Predicting the Reverberation Time in Long Enclosures
• Implementation of the Uniform Theory of Diffraction in the Phased Beam Tracing Method
• Effects of Reverberation Time and Sound Source Characteristic to Auditory Localization in an Indoor Sound Field
• A Review of Residential Balconies with Road Traffic Noise
• Research of Auralization in Small Enclosures
• Acoustics in Large Atrium Spaces
• Acoustic Properties of Sound Barriers
• Transmission of Sound in a Long Enclosure with a “T” Intersection
• Time Domain Large-Scale Finite Element Sound Field Analysis of a Multi-Purpose Hall
• S-Combustion noise
• Numerical Study of Structural Vibration Induced by Combustion Noise - One Way Interaction
• Overview of Different Approaches for Active Control of Combustion Instabilities
• Active Control of Combustion Instability Using Pilot and Premix Fuel Modulation
• Application of Modal Parameter Derivation in Active Suppression of Thermo Acoustic Instabilities
• The Acoustic Wave Propagation Equation in a Turbulent Combusting Flow
• An Asymptotically Motivated Hyrodynamic-Acoustic Two-Way Coupling for Modeling Thermoacoustic Instabilities in a Rijke Tube
• Passive Control of Combustion Induced Noise in an Auxiliary Bus Heating System
• The Rijke Tube: Green’s Function Approach in the Time and Frequency Domain
• Experimental Validation of Linear Analysis in Premixed Combustors Supported by Active Control
• Sound Propagation in a Region of Hot Gas Using the DRBEM
• Experimental Study of the Flame Cone Kinematics of Acoustically Perturbed Premixed Laminar Bunsen Flames
• S-Computational aeroacoustics
• A 3D Numerical Method to Study Poroelastic Liners with Mean Flow
• Computation of Indirect Combustion Noise by a CAA-Method
• Validation of an Innovative Hybrid Method for the Prediction of Noise Generated by Confined Flows
• A Selective Overview of High-Order Finite Difference Schemes for Aeroacoustic Applications
• Two- and Three-Dimensional Coupling in the Noise Prediction of the Edge Tone
• Effect of Boundary Conditions and Source Truncation in the Prediction of Flow-Generated Sound
• Stepwise Air Flow in the Gravity Draught Aeroacoustic Tunnel
• Numerical Investigation of Aerodynamic Sound Radiated from a Bluff Body Using Lighthill Tensor
• A Source Term Formulation for the Non Linear Euler Equations in a Conservative and Perturbation Form
• S-Education of acoustics and vibration
• Succesful Teaching of Experimental Vibration Research
• A Tempus Experience: New Curriculum in Sound and Vibration Control in Egypt
• S-Elastodynamics of periodic structures and composites
• Flexural Vibration Band Gaps in Periodic Pipe System Conveying Fluid
• Non-Periodic Locally Resonant Sonic Materials
• Wave Propagation in Thin Orthotropic Media
• Directional Propagation Characteristics of Flexural Wave in Two-Dimensional Periodic Grid-Like Plate Structures
• Finite Element Modeling of Multi-Layer Composite Plates with Internal Delamination
• Vibration Attenuation in a Periodic Rotating Timoshenko Beam
• Vibration of Elastic Rings Excited by Periodically-Spaced Moving Springs
• Acoustic Wave Propagation Modeling for Periodic Structures as Applied to Anechoic Coating Design
• Experimental Studies on Two-Dimensional Acoustic Defect-Mode Waveguides in a Sonic/Phononic Crystal
• Vibration Based Modelling of Three Point Bend Specimen for Evaluation of Dynamic Stress Intensity Factor
• An Algorithm for Studying Wave Propagation in Phononic Crystals Composed of Viscoelastic Material
• S-Environmental noise and vibration from metro, tramways and highway transportation
• The Affect of the Thessaloniki Ring Road Traffic Noise Emission on Hospitalized Patients in Papageorgiou Hospital
• Influence of Traffic Sound Parameters on the Reading Performance in Elementary School Children
• Vibration from Railways: Can we Achieve Better Than ±10 dB Prediction Accuracy?
• Environmental Effects from Vibration Emitted from the Operation of Urban Highways: A Measurement Campaign at Athens Ring Motorway Network
• Occupational Noise Vibration & Air Pollutants Fluctuation Inside the Toll Booths in the Athens Ring Motorway Network: “Attiki Odos”
• Environmental Noise Investigation Procedure in the Urban Road Network in Malta
• The PiP Model, a Software Application for Calculating Vibration from Undergrond Railways
• Modelling of Floating-Slab Tracks with Discontinuous Slabs in Underground Railway Tunnels
• A Preliminary Study of Noise in a Tunnel Due to a Moving Train
• S-Fan and airframe noise sources
• Demonstration of Inadequacy of Ffowcs Williams and Hawkings Equation of Aeroacoustics by Thought Experiments
• Three-Dimensional Predictions of the Rod Wake-Airfoil Interaction Noise by Hybrid Methods
• Aeroacoustic Computations of a Counter-Rotating Fan
• Aeroacoustic Investigation of a Tip Clearance Flow
• The Role of the Inflow Momentum Thickness in Subsonic Cylindrical Cavity Noise Generation
• Laminar Boundary Layer Instability Noise Produced by an Aerofoil
• Predictions of Fan Broadband Noise Due to Rotor-Stator Interaction
• S-Fan noise propagation
• Sound Radiation from a Buried Nozzle with Jet and Bypass Flow
• Turbomachinery Noise Radiation Through the Engine Exhaust (TURNEX)
• Applications of a Finite-Element Mode-Matching Method to Acoustic Design of the Bypass Duct of Turbofan Engines
• Aft Fan Noise Reduction with a Lined Afterbody
• Comparison of Numerical Approaches for the Simulation of Sound Radiation from a Scarfed Inlet
• 3D Numerical Simulations of Acoustic Installation Effects on Aft Fan Noise for Turbofan Engine
• Frequency-Domain Prediction of Sound Propagation Through Axisymmetric Flow Ducts
• Time-Domain Acoustic Simulation of 3D Lined Ducts with Flow Using an Unstructured Discontinuous Galerkin Method
• S-Flow induced noise and structure-acoustic coupling
• Free Vibration of Vertical Pump
• Eigenvalue Variation of Fuel Rod Exposed to Uniform Axial Flow
• Using Statistical Methods to Predict Induced Sound and Vibration in Aerospace and Automotive Applications
• Transient Dynamic Responses of an Internal Liquid-LNG Tank-Sea Water Interaction System Excited by Waves and Earthquake Loads
• S-GIS application in noise assessment
• Dissemination of Predicted Noise Levels in a 3D Visualised Interactive Environment Through the Internet for 3D EIA and Planning Projects (Hong Kong)
• How Territory-Wide GIS-Based Road Traffic Noise Assessment Tools Facilitate Decision Making in Strategic Level Environmental Assessment
• Practical Experience in Engaging the Public Through Interactive 3D Technology in Retrofitting Barrier Projects on Existing Roads
• Technology Driven Solutions for the Quantification of Urban Road Noise
• State-Wide Road Noise Mapping of Queensland, Australia
• GIS for the Evaluation of Road Traffic Noise at Areas Facing Roads in Japan - Key Functions Including Estimation of the Numbers of Residents in Buildings
• Standardization of Road Traffic Noise Map in Korea
• Noise Mapping - What for and How to be More Effective?
• An Overview of the Impact of Source Data Accuracy Variations on the Overall Accuracy of Noise Maps
• S-Intelligent methods of active noise and vibration control
• Buckling and Vibration Analysis of Magnetoelectroelastic Beam
• Linear Modelling of Magneto-Rheological Dampers Using Hybrid Intelligence Technique
• Design of Semi-Active Tuned Mass Damper for Controlling Seismically Induced Responses of Elastic and Inelastic Structures
• S-Jet noise
• Noise Prediction of a Serrated Nozzle Using a Hybrid Approach
• Critical Issues in Experimental Jet Aeroacoustics
• Large Eddy Simulation of Jet Noise
• S-Microphone array applications
• Localisation of Coherent Sound Sources Using a Microphone Array
• Loud: A 1020-Node Microphone Array and Acoustic Beamformer
• An Investigation into the Fault Detection of Machines Based on Acoustic Array Systems
• One Sensor Microphone Array Application in Source Localization
• Optimal Circular Array Configuration
• S-Mid and high frequency methods
• Using the Hybrid FE-SEA Method to Predict Structure-Borne Noise Transmission in a Trimmed Automotive Vehicle
• Efficient Wave Based Models for Acoustic Scattering and Transmission Problems Using Point Source and Planewave Excitation
• On the Use of a High-Order Finite Element - Wave Based Method for Interior Acoustic Cavity Analysis
• Application of Modal Model Reduction for Hybrid Structural Finite Element - Acoustic Wave Based Models
• Wave-Based Discontinuous Galerkin Methods in the Frequency Domain with Application to Flow Acoustics
• Natural Frequency Statistics of Plates with Bounded Uncertain Properties Using Interval Analysis
• Efficient Numerical Models for Investigating Statistics of Random Dynamic Systems
• Modelling Complicated Systems with Partly Unknown Dynamic Properties as “Structural Fuzzy”
• High Frequency Approximations for Treating Acoustic Radiation or Scattering Problems with the Boundary Element Method
• Physics-Based Numerical Method for Analyzing Mid-Frequency Acoustic Radiation
• Generation and Validation of Acoustic 3D WBT Models of a SUV Driver Compartment from SEA Models
• Modeling Methods for Vibro-Acoustic Analysis of Commercial Aircrafts
• The Coupling of a Hearing AID Loudspeaker Membrane to Visco-Thermal Air Layers
• S-Muffler acoustics
• Prediction of Breakout Noise from End Plate of an Expansion Chamber Using Coupled FE/BE Analysis
• Recent Advances in IC-Engine Acoustic Source Characterisation
• Experimental Identification of the Transfer Matrix of the Muffler
• FRITAmuff: A Comprehensive Platform for Prediction of Un-Muffled and Muffled Exhaust Noise of IC Engines
• Sound Propagation in Narrow Channels with Arbitrary Cross Sections and Superimposed Mean Flow with Application to Charge Air Coolers
• Transfer Matrix Method for Dual-Chamber Mufflers
• One Design of a Silencer for Attenuating Fan Noise
• Study on the Simulation Design Method About Exhaust Muffler of Vehicle
• Application of Dual Reciprocity Boundary Element Method to Predict Acoustic Attenuation Characteristics of Silencers with Complex Flow
• S-Musical acoustics
• Fractional Fourier Transforms for Spectral Analysis of Music Signals
• Wavelet Design for Music Perception Applied to Indian Classical Music
• Towards a Music Synthesizer Controlled by Timbral Adjectives
• Nonlinear Vibration Analysis in Acoustics
• A Study of Input Mobility Functions at a Violin’s Bridge
• The ‘Didjeriduo’: Musical Implications of a Three-Port Branched Duct
• Geometric Shape Identification for Multi-Mode Tuning of Percussion Instrument Bars
• Experimental Study of the Flow-Excited Acoustical Lock-in in a Corrugated Pipe
• S-NVH
• Brake Noise in Practice
• Disc Brake Squeal: Progress and Challenges
• One-Dimensional Topology Optimization for Transmission Loss Maximization of Multi-Layered Acoustical Foams
• Questionnaire-Based Survey on Drivers’ Noise and Vibration Discomfort
• Identification of Vehicle Interior Noise Sources Using Vibro-Acoustic Spectral Analysis Method
• Evaluation of Enhancement of Sound Quality of Axle Gear Based on Artificial Neural Network
• Integration of Sub-Systems on Vehicles
• S-Nearfield acoustic holography and beamforming
• An Investigation on the Sensor Proximity Effect in the BEM- Based NAH
• Acoustic Modelling of Machines Using the Inversion Method
• Application of Diagnostic Techniques in Improving Vibration and Acoustic Prediction
• Extending the Usability of Near-Field Acoustic Holography and Beamforming by Using Focalization
• Weighted Statistically Optimised Near Field Acoustic Holography with Pressure-Velocity Probes
• Research on the Theories of BEM Based Cyclostationary Near Field Acoustic Holography
• Plate Moduli Estimation Using Nearfield Acoustic Holography Techniques
• Experimental Application of High Precision K-Space Filters and Stopping Rules for Fully Automated PNAH
• Microphone Array Beamforming and Methods for the Reconstruction of Ducted Acoustic Sources
• Acoustic Holography and Complementary Boundary Conditions
• Acoustic Antenna Design General Guidelines for Beamforming Noise Source Localization
• S-Noise and vibration in reciprocating and rotary compressors
• Modified General Transfer Matrix Method for Linear Rotor Bearing Systems
• FFT Based Complex Critical Band Filter Bank and Time-Varying Loudness, Fluctuation Strength and Roughness
• Noise and Vibration of Positive Displacement Compressors - A Review
• Noise Reduction of a Reciprocating Compressor by Adding a Resonator in Suction Path of Refrigerant
• S-Noise in cities
• A Survey on the Control of Environmental Noise Ingress into Residential Apartment Buildings
• The Acoustic Characterization of the Urban Territory with Continuous Cycle Producing Settlements
• Analysis and Evaluation of Environmental Noise Conditions in Two Different Areas in Mexico City
• Management of Environmental Noise - Cracow Example
• No Worries - How to Handle Acoustical Planning Problems with Noise Calculation Software
• Quiet City - A European Project to Support Cities in Noise Mitigation
• S-Nonlinear acoustics and vibration
• Characterization of Variable Material Properties by Nonlinear Acoustic Techniques
• Simplifications and Solutions of Diffraction Functions in Nonlinear Acoustic Parameter Measurement
• Modelling and Simulation of Ultrasound Non Linearities Measurement for Biological Mediums
• A Center Manifold Algorithm for Nonlinear Dynamic Systems with Time-Delay and Parametric Excitation
• Sometimes Digital Control Leads to Chaos
• An Analytical Model for Drillstring Axial Vibration
• Limit-Cycle Oscillation of Shape Memory Alloy Hybrid Composite Plates at Elevated Temperatures
• Identifying Chaotic Dynamics in a Flying Vibratory System
• Study on Mechanized Mathematics Modelling for 200 MW Turbo-Generator System
• Rectifications of Parametric Instability Due to Asymmetry of Rotating Shaft
• Theoretical Research Regarding Any Stability Theorems with Applications
• Free Vibrations of the Systems of Rigid Bodies Coupled by Elastic Bars
• Static Output Feedback Control for Non-Linear Flutter and Limit Cycle Oscillation
• Phase Change Analysis of Planar and Nonplanar Vibration in One-to-One Resonance of Nonlinear Cantilever Beam
• A Non-Linear Model for Studying the Motion of a Human Body
• Non-Linear Aspects of Human Body’s Motion in Car Crash
• Bearing Profile and Misalignment Effects on the Vibration Behaviour of Rotating Machinery
• Non Linear Response of Beams Using Finite Element Method with Symplectic Integration Scheme
• Numerical Simulation of Nonlinear Sound Wave Propagation Using CIP Method
• The Analytical Calculations of the Parameters of the Fluctuations of the Ballistic Missiles
• Gauge Invariance Approach to Acoustic Fields
• Vector Theory of Ultrasonic Imaging
• Generalisation of Veselago’s Negative Refraction Theory Using Symmetries
• Analysis of Golf Ball Spin Mechanism at Impact by FEM
• Design of a Hula-Hoop Energy-Harvest Device Paper
• Effects of Landing Gear Nonlinearities on Ground Resonance of Helicopter
• A Study on Response Analysis of Pneumatic Vibration Isolation Table Loaded by Transient Movements of Carriage on it
• S-Passive techniques in vibrations and acoustics attenuation
• Passive Noise Control of a Burner-Combustor System of a Turbo-Fan Engine
• Nodalization of Isolator for Floating Floor Design
• The Effects of Local Modes on Vibration Reduction of Building Isolation
• Theoretical and Experimental Results of the Transmission Loss of a Plate with Discrete Masses Attached
• Design Analysis of a Rubber Mount System for a Push-Type Centrifuge
• The Dynamic Characteristics of SMA Helical Spring in Axial Vibratory Motion
• Noise Transmission Control of Double Partition Windows Using T-Shaped Acoustic Resonators
• Development and Application of High Damping Alloys for Noise and Vibration Control
• Internal Resistance Optimization of a Helmholtz Resonator in Noise Control of Small Enclosures
• Design of Sydney Olympic Stadium for Mitigation of Crowd-Induced Vibration
• Theoretical and Experimental Investigation on Power Flow of a Raft Vibration Isolation System
• Transmission Path Characterization for Passive Vibration Control
• Particle Damping for Vibration and Noise Reduction
• S-Pattern recognition in acoustics and vibration
• Reassignment Vector Field for Time-Frequency Segmentation
• Novel Transform for Vibro-Acoustical Recognition of Bilinear Systems
• Separating Gear and Bearing Signals for Bearing Fault Detection
• S-Shunt damping technology for control of sound and vibration
• Sound Absorption of a Vibrating Plate with Piezoelectric Materials and Passive Electrical Networks
• Vibration Suppression Performances of Power Harvesting Systems Using Piezoelectric Transducers
• Some Results on Control of Sound Radiation Using Shunt Piezoelectric Materials
• S-Sound insulation
• Comparative Analysis of Retrofit Windows for Noise Control at a Hotel
• Lightweight Timber Floors: a Simple Guide to Low-Frequency Impact Insulation
• Design Chart of Sound Insulation for Multiple Panels
• Studies on Insertion Loss Experiment of Cracked Plates
• Subjective Evaluation of Heavy-Weight Impact Sounds Generated by an Impact Ball
• Reducing the Heavyweight Impact Sound Levels in Reinforced Concrete Structures Using Viscoelastic Damping Materials
• Investigation of a Two-Parameter System of Evaluating Impact Noise Insulation
• The Directivity of the Forced Radiation of Sound from Panels and Openings
• Comparison of Experiment, Finite Element and Wave Based Models for Mass Inclusions in Poro-Elastic Layers
• Correlation of Impact Isolation Test Results Using Standard Tapping Machine and Heavy/soft Impact Source
• A Study on the Measurement of Sound Insulation of a Small-Size Window
• Implementation of a Hybrid Model for Prediction of Sound Insulation of Finite-Size Multilayered Building Elements
• Guide for Flanking Sound Transmission in Wood Framed Construction - Airborne Sources
• The Road Traffic Noise Attenuation by External Wall of Office Building in Standard Work Conditions
• S-Soundscapes
• Areas of High Acoustic Quality: Soundscape Planning
• Change in Quality of Environmental Sound in the Autumn
• On Annoying Sounds Generated as Byproducts of ‘Good Intentions’
• S-Spatial hearing in human environments
• Three-Dimensional Acoustic Displays in a Museum Employing WFS (Wave Field Synthesis) and HOA (High Order Ambisonics)
• Psychoacoustic Evaluation of a New Earpiece for Augmented-Reality Audio
• Acoustic Clarity and Auditory Room Size Perception
• Ambisonic Localisation - Part 2
• Binaural and Monaural Helmet Systems: Noise Considerations
• S-Transport noise and vibration
• Driver Exposure to Noise from Audio Tactile Line Marking in Queensland
• Study on Calculating Acoustic Sensitivity of Car Cab Based on Finite Element Method
• Noise in Highways: Development of a Statistical Prediction Model
• Vibrations of Multi-Span Bridges Under Moving Loads
• Reduction of Ground Vibration by Means of Ground Improvement Along a Railway Track
• A Model for Calculating Vibration from a Railway Tunnel Buried in a Full-Space Including Rigid Bedrock
• Study on Using Noise for Adhesion Control System of Railway Vehicle
• Structure-Borne Sound Contribution into Earth-Moving Machine Cabs
• Investigation of STL Measurement Method at the Vehicle Component Level and Correlation between Measurement and Prediction
• On Reducing the Shock Response of a Single Degree of Freedom Vehicle Model by Switching the Damping Coefficient
• Experimental Verification of Full Vehicle Sea Model
• S-Underwater and ship acoustics
• Comparison of Transmission Loss Models at Mid-Frequency against Shallow Water Data
• Response of Hull Plates Due to Turbulent Boundary Layers
• The Study on the Effect of the Lateral Vibration of Shafting on Underwater Structural Acoustic Radiation
• Assessing the Impact of Underwater Noise on Marine Fauna: A Software Tool
• Advances in Monitoring and Mitigation of Ship Signatures
• Application of Rational Orthogonal Wavelets to Active Sonar Detection of High Velocity Targets
• Approaches for Automating Underwater Simulations by PE Method
• Measurement of the Underwater Ship Noise by Means of the Sound Intensity Method
• Gauging of Hydroacoustic Transducers in Small-Scale Measurement Pools Using Continuous Signals
• Underwater Acoustic Propagation Model to Simulate Seismic Oceanography Experiments
• Sonobuoy Display Integration
• Improved Structure-Acoustic Interaction Models, Part I: Model Development
• Ocean Acoustic Interferometry Experiment
• Acoustic Signature of a Submarine Hull
• Study on the Characteristics of Vibration and Acoustic Radiation of Damaged Stiffened Panels
• Improved Structure-Acoustic Interaction Models, Part II: Model Evaluation
• Local Ship Vibrations - A Methodology for Their Evaluation and Control from the Early Design Phase
• Underwater Noise Impact of Offshore Wind Farms During Construction and Operation Phases
• A Boundary Element Package Containing Approximate Solvers for Treating High Frequency Acoustic Scattering
• Spectral Characteristics of Wall Pressure Fluctuations for Surface Ships
• Excitation of a Submarine Hull by Propeller Forces
• Recent Developments in Fibre Optic Hydrophone Technology
• Diver Detection Sonars and Target Strength: Review and Discussions
• Some Study of Dynamic and Acoustic Character of Steerable Streamers for Ocean Exploration
• S-Vibroacoustics and shock excitation of spaceflight vehicles
• Radiation Efficiency of Acoustic-Excited Plates with Stringer Attachments
• Attenuation of Shock Transmission Through a Launch Vehicle Payload Adaptor
• Initial Assessment of the Ares I-X Launch Vehicle Upper Stage to Vibroacoustic Flight Environments
• Vibroacoustic Response of the NASA ACTS Spacecraft Antenna to Launch Acoustic Excitation
• MSL Pyroshock Development Test Program for Shock Mitigation
• Stiffeners Effect on Sound Transmission Through a Thin Plate Excited by a Turbulent Boundary Layer (Corcos Model) - Comparison with a Diffuse Sound Field
• Sound Reduction by Using Acoustic Resonators for Payload Fairing of Small Launch Vehicle
• Virtual Vibration Test and Verification for the Satellite
• Study on Numerical Vibro-Acoustic Analysis of Spacecrafts
• Development of a General Periodic SEA Subsystem for Modeling the Vibro-Acoustic Response of Complex Structures
• S-Vibroacoustics of building structures
• Simulation of Mechanical Systems in Loading with Broadband Random Axitation
• The Dynamic Analysis of a Building Structure - Acoustic Volume Interaction System Excited by Human Footfall Impacts
• Measurements of Viscoelastic Properties of Concrete Structure Using Beam Transfer Function Method
• Vibration Control of Buildings: Case Studies
• Two Modelling Approaches for Periodic Rib-Stiffend Plates Typcial of Floor Assemblies
• Control of Radiated Noise from Ship’s Cabin Floor